NC Primer Surfacer White / Grey

It is a fast-drying, high-filling base coat used on auto body panels, metal, and MDF/wood to fill minor scratches and create a perfectly smooth surface for painting.

White primer is ideal when your final topcoat is a light or bright color (like white, yellow, or pearl), helping the final paint look brighter while using fewer coats.

No, it is a single-pack (1K) product, so you only need to mix it with thinner.

Always use a high-quality AngelCoat NC Thinner for smooth spray flow and fast drying.

Mix 1 part of NC Primer Surfacer with 1 to 1.5 parts of NC Thinner to get the right spray consistency.

It should be applied using a spray gun (at 40-50 psi) to ensure an even, thick layer that is easy to sand later.

It dries exceptionally fast, becoming touch-dry in just 10 to 15 minutes.

It cures quickly and is ready for easy wet or dry sanding in just 30 to 45 minutes.

Use 320-grit or 400-grit sandpaper to achieve a glass-smooth finish without leaving deep scratch marks.

Apply 2 to 3 medium coats, waiting 5 to 10 minutes (flash-off time) between each coat.

It acts as an excellent, strong base for NC Auto Paints, 2K PU Paints, and Synthetic Enamels.

Pinholes occur if you spray the coats too thick without waiting for the 5-10 minute flash-off time between coats, trapping the thinner inside.

This happens if you apply the final color paint before the NC Primer Surfacer is completely dry; always ensure the primer is fully sanded and hard before painting.

Angel Coating NC Primer Surfacer White is supplied across several states in India, including Gujarat, Rajasthan, Punjab, Uttar Pradesh, Madhya Pradesh, Chhattisgarh, Goa, Kerala, Tamil Nadu, and Karnataka.