NC Putty Grey

It is a fast-drying spot putty used to fill minor dents, deep scratches, and pinholes on auto body panels, metal, and wood.

The grey color provides excellent contrast over bare metal and primers, making it easy for painters to spot imperfections while sanding.

No, it is a single-pack (1K) air-drying putty that is completely ready to use straight from the tin without any hardener.

Apply it firmly and smoothly using a flexible metal or plastic putty knife (patra/blade).

No, NC Putty is only meant for minor scratches and shallow imperfections; for deep dents, you must use a 2K Polyester Body Filler first.

Pinholes occur if air gets trapped under the putty blade during application or if you press the putty knife down incorrectly.

It dries incredibly fast and becomes touch-dry in just 5 to 10 minutes.

It becomes fully hard and ready for wet or dry sanding in just 30 to 45 minutes.

Use 320-grit or 400-grit waterproof sandpaper to achieve a perfectly smooth, feather-edged finish.

Never apply thick layers; always apply multiple thin coats (waiting 5-10 minutes between coats) to prevent shrinking and cracking.

Always spray a coat of AngelCoat NC Primer Surfacer over the sanded putty to completely seal it before applying your final paint.

Shrinking and cracking happen if the putty was applied too thick in a single coat or applied over a wet, uncleaned surface.

It is meant to be applied directly from the tin, but you can add a few drops of AngelCoat NC Thinner if it becomes too thick or dry.

Angel Coating NC Putty Grey is supplied across several states in India, including Gujarat, Rajasthan, Punjab, Uttar Pradesh, Madhya Pradesh, Chhattisgarh, Goa, Kerala, Tamil Nadu, and Karnataka.